Category Archives: Chasewater Railway Museum Bits and Pieces

Chasewater Railway Museum – A Bits & Pieces article from Mercian Vol.1 No.3 1968

Posted on March 27, 2020 by | 2 comments

A Bits & Pieces article from Mercian Vol.1 No.3 1968

Taken from the Mercian Vol.1 No.3 an article by Gerald Wildish about our Neilson Locomotive. (Now, in 2020, in private ownership.)Shown here carrying the ‘Alfred Paget’ Nameplate

Neilson & Son Ltd., No.2937 of 1882

Bairds & Scottish Steel  Ltd.’s No.11

Delving back through the records of Bairds & Scottish Steel Ltd., one comes across several interesting details about the locomotive which we hope will be at Chasewater before the summer is out.  Some of this information which has come into my hands is included in this article.

No.11 was the fifth locomotive built by Neilson’s for Bairds, two of which were six-coupled.  She was the second 14-inch four-coupled built for Bairds. (The first, No.13 – built in 1876 passed to the NCB in 1948 and will eventually find a home at Falkirk).  Supplied new to Bairds in 1882, she cost £1,275.  Engines built to this design cost Bairds between £925 and £1,300, the cheapest being the last, the second, No.3 delivered in 1889.

My own personal records of No.11 go back no further than 1889, but in May 1900 a new firebox and tubes were fitted.  The next major repairs were in 1911 when a further new firebox and tubes were fitted.  A minor overhaul took place when a new right-hand coal bunker was supplied and the tank replaced.

After 1916 the records became scant until 1934 when greater detail is once again recorded.  In January 1936 another semi-major overhaul took place: new plates were provided for the boiler and a new brake assembly was fitted.  A year later the firebox was patched and all mountings ‘done-up’.  In July 1938 she was stopped again for general repairs and in November was fitted with a new firebox, repairs continuing until March, 1939.

In 1941, 4 new tyres were fitted, new brasses being added at the same time during a heavy general repair.  She returned to the works in June 1943 when the boiler and firebox were condemned, but was back at work with new boiler and firebox, a patched tank and new brake cylinder block and shaft in less than six weeks.  It shows what work can be carried out quickly during war time. (Due to the pressure of keeping engines at work, No.1 – the ex GERJ 15 class was sent to Cowlairs for overhaul.)  A further new firebox was fitted in August, 1945 during another heavy overhaul.

New tyres were fitted in the general overhaul of 1947, but the next interesting occurrence came in the heavy overhaul of 1949, after fitting new tubes, a further new firebox was fitted and the boiler removed for hydraulic testing.  However, when being removed for testing, the rope broke damaging the boiler, which had then to be lifted into the shed and rebuilt on the frames for testing again.  Eventually the boiler was hydraulically tested to 200 lbs. and steam to 135lbs.

Fireboxes seemed to wear out very quickly on the Neilsons for the 1950 firebox fractured in 1954 and was presumably replaced although the records do not state this.  General repairs followed in 1958 and 1963, when the boiler was announced to be satisfactory and in June 1967, just before the works closed.

When the works closed in July, apart from being the second oldest working locomotive in the British Isles, No.11 was the last to be repaired at the Gartsherrie Works.  She is in excellent mechanical order and when inspected by the engineers in February of this year (1968), it was pronounced that she would be the best of the RPS stock in this direction.  She lacks paint – I have no record of her being painted after 1950 – and remains in the post-war black.  She was never repainted dark blue as were many of her contemporaries at Gartsherrie.  We hope, funds permitting, to move her to Chasewater at the end of May or early June.  We have enough money to complete the purchase but we are still short of removal funds by several pounds.

Summary of dimensions:

Weight: 28 tons, Boiler Pressure: 120lbs. per sq.in.

Overall Length: 23ft 7ins.  Tractive Effort: 8885lbs.  Height: 10ft 10ins.Line drawing of the Neilson also by Gerald Wildish

2 Comments

Posted in Bits and Pieces, Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , , , ,

Chasewater Railway Museum 1968 Vol.1 No.3 Bits & Pieces 42.3

Posted on March 23, 2020 by | Leave a comment

Chasewater Railway Museum 1968 Vol.1 No.3 Bits & Pieces 42.3

Plus Stocklist – 1968

This is one of a number of articles included in this magazine – there will be another couple to follow later. I don’t know what happened to this loco, but in spite of it being purchased and delivered to Chasewater, it hasn’t steamed since!

Hudswell Clarke 0-6-0ST No.431 – By Frank Harvey

Working at Desborough – V F Hall

 

The previous issue of the Mercian featured several photographs of this, our latest locomotive, and it was felt that a short article about it would not be out of place.

It was built by Hudswell Clarke & Co., Leeds in 1895, works number 431 and spent most of its life in the hands of the Sheepbridge Coal & Iron Company in whose fleet she became No.15.  It was allocated the name ‘Sheepbridge No.25’, but this was never carried and with the removal of its official number and works plates ran its last years without any identification at all.

It has on two occasions been rebuilt, first in 1928 and secondly in 1944, by the Sheepbridge Company themselves.

The engine was first suggested as a suitable candidate for preservation some two years ago when it was one of several locomotives at work at Desborough Warren Quarry near Kettering.  One by one its companions were withdrawn leaving No.15 as the only workable source of motive power.  After closure of the quarry it assisted with the lifting of the track, until the early part of 1967 when it too was withdrawn and stored in the engine shed at Desborough in company with an Avonside 0-6-0T.

The RPS then stepped in and after pleasing, successful negotiations with Stewarts and Lloyds Ltd., the locomotive was purchased.  The firm kindly allowed us to steam the engine before purchase – and members will have read about this eventful weekend in the last issue of the magazine. (CRM Bits & Pieces No.41).

It proved to be in good working order and required little in the way of attention save for the fitting of two new injectors which have now been purchased, and the repairing of a cracked blower pipe.  Evidence of this can be seen clearly in the photographs!

Desborough, 1968

The locomotive was delivered to Chasewater in November and restoration is now well under way.  When completed it will be resplendent in apple green, lined black, edged white and a high standard is being achieved.Chasewater August 1969

Purchase and transport charges tended to deplete the Society’s funds somewhat, but all agree that it was money well spent and in common with all other RPS stock, no money is outstanding, a fact of which we are justifiably proud.

Although restoration is unlikely to be completed before 1969, we look forward to seeing No.15, the oldest working Hudswell Clarke, in steam at Chasewater later this year.In the Heritage Centre, 2010

Stocklist – 1968

With so many new additions, it was decided to publish a stocklist in the 1968 Mercian, Vol.1 No.3

I hope you can read it ok, it’s interesting to see what’s still here after 40-odd years, and what’s gone.

Leave a comment

Posted in Bits and Pieces, Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , , , , , , , , , , , , , , ,

Chasewater Railway Museum 1968 Vol.1 No.2 Bits & Pieces 42.1 & 2

Posted on March 17, 2020 by | Leave a comment

Chasewater Railway Museum 1968 Vol.1 No.2 Bits & Pieces 42.1 & 2

From the Chairman’s Notes 1968 Vol.1 No.3.

The Society is now passing through a difficult stage, this is common with individual members, indeed the country as a whole, is suffering from a severe depression with the economic climate.  The loan for our museum building has now been deferred, may we hope for better tidings later in the year?  We are, however, most grateful to members who are coming forward with loans to cover the cost of the museum compound.  Once this compound has been erected and the track into it laid, we should have two of the locomotives installed in the compound and ready for steaming.  The target date is late June and should not prove too difficult, if help, both financial and practical, is immediately forthcoming.  Your committee is working extremely hard, both on administration and practical work.  I therefore appeal to all members to back the committee and so push the work along faster.  A colossal amount of work has to be done this summer.  I am going to itemise the list of vehicles which require immediate attention.

D. A. Ives.

From the other reports 1968 Vol.1 No.3. 42.2

From the Hon. Secretary’s Report

The work on the Andrew Barclay loco (Colin McAndrew) at Hixon is almost finished.

Trevor Cousens and Allen Civil visited Stewarts and Lloyds at Bromford Bridge to buy loco spares to replace parts on the Hudswell Clarke and the Barclay locomotives.

Early in March 1968 some track was stolen from Chasewater.  It has since been replaced and measures are in hand to prevent any further occurrence.  A security compound will be constructed in the very near future to house the stock there.

Restoration Work at Hednesford.

Slow progress has been made on the MR Royal Saloon, the clerestory roof has had pitch applied.  The damp has caused the roof inside to crack up.  We understand that work is now in hand to the two side panels which need attention.  The outside is now being given a coat of undercoat.

The LNWR TPO needs a good coat of red oxide, some of the woodwork needs replacing.  The roof has had some attention and is more waterproof.

The TPO needs a good sort out inside, with new relics arriving all the time, we are getting very short of room in this vehicle.  A great number of relics have to be stored because there is not enough space to display them.

The Maryport & Carlisle 3rd Class carriage is almost completed, the wheels need finishing with a white rim.  The underframes require another two coats of paint.  One door has been made complete by Frank Harvey and another door by Laurence Hodgkinson – this needs to be hung.

It is hoped to move the Midland Railway crane to Chasewater in the near future, where it will be used for track laying purposes.

The Midland Railway Crane at Chasewater 1969

The Midland Railway horse drawn delivery van requires another coat of paint and the roof needs re-canvassing.  Two of the wheels need repairing.  (I knew that we had this van, but I’ve never seen it and have no idea where it came from – there has been nothing in the magazines so far.  It is now on loan at Shugborough)

Robert A. Ives.

The Chasewater Report

At last we have permission to start the compound, I hope work will commence within the next month as so much depends on getting this site ready for steaming of locomotives this summer.  I think it is most important that we make an effort to attract the general public.

New arrivals this summer (all being well) will be a bolster wagon from Holly Bank and the Midland Railway crane from the Hednesford depot.  We hope during May, the Neilson from Glasgow and a Hawthorn Leslie from Manchester will have arrived, and there is also a likelihood of two salt wagons from Sandbach, Cheshire; and providing suitable transport can be found at a reasonable cost, the Manchester, Sheffield and Lincoln coach and the South Eastern and Chatham Railway brake from the Derwent valley should also be here by the late summer.  (There was an appeal for £400 for the transport costs later in the magazine.)MSL Coach in the Heritage Centre 2010

Track clearing is still making steady progress, although there have been one or two setbacks, e.g.  the extensive re-packing of the point at the south end of the passing loop, due to the continual burning of the bank; the work has now been successful.  The latest bit of vandalism as you no doubt have read was the removal of three lengths of track from the north end of the line by people of low moral character (I would have expressed it somewhat differently! Starts with a ‘b’ and ends with an ‘s’!), resulting in the derailment of the tool van and the flat wagon.  This has now been completely relaid.

During the next two months a total of 1053 feet of track has to be lifted and relaid on the compound site, as you will no doubt gather this will require a great deal of hard work by the Chasewater working party to meet the deadline, and we would appreciate very much the appearance of members whom we have not seen so far.

The Chasewater Working Party 1968

Due to the rapid expansion of the relics at both Hednesford and Chasewater, I think the need arises in the centralisation of work at these two depots.  There is a strong case for forming various departments i.e. loco footplate crews, signalling department fitters and permanent way staff.  If anyone has any ideas on the above departments, please let Frank Harvey or myself know.

Laurence Hopkins.

Hednesford Depot

This article was written as an appreciation of the work done at Chasewater and Hixon towards getting the Chasewater site and loco ready for steaming later this year (1968).

But it also asked for more work to be done at Hednesford, as the state of the Travelling Post Office and the Royal Saloon was giving rise to some concern.  Mr. Siberry was asking for a weekend in May to concentrate on painting these two items.

There are still more articles to come from this edition – about the Hudswell Clarke, the Neilson and the Chasewater Line – not to mention the stock-list!

Leave a comment

Posted in Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , ,

Chasewater Railway Museum 1968 Vol.1 No.2 Bits & Pieces 41

Posted on March 10, 2020 by | Leave a comment

More on the history of Chasewater Railway, now coming to the end of the 1960s

Taken from Mercian Early 1968 Vol.1 No.2

Hon. Secretary’s Report

This is the first time I have had the pleasure of writing a report for the ‘Mercian’.

As some of you are aware Mr. D.A.Ives resigned at the AGM from the post of Secretary, after eight years of Secretaryship of the Society, in which he has put in a tremendous amount of work.  I was elected Secretary for the coming year at the AGM, and Dave has very kindly stayed on as Joint Secretary, until I am fully conversant with the job.

There have been several interesting developments recently, which I might briefly mention, as they are all very new.  Firstly the Brownhills-Aldridge UDC have kindly filled in and levelled the plot of our proposed Museum at Chasewater.  Secondly our line at Chasewater is now an isolated railway – we have been cut off from BR by the removal of a level-crossing.  (Presumably the one at the entrance to Anglesey Sidings) Thirdly on Saturday 2nd December, 1967, a long-awaited member of our loco stud arrived – by road – a Hudswell Clarke 0-6-0ST, used until December, 1966, in the Ironstone Quarries at Desborough.  This locomotive was steamed by Mr. Civil and Mr. Luker (our expert loco-fitters) before purchase, and ran for some little while before they declared it a good purchase.  Fourthly we are now in possession of a weed-killing wagon from Holly Bank Colliery, which will be a useful vehicle.  Lastly we have the MR covered wagon ex bass Breweries, now at Chasewater.

Things have been happening in the last week or two, but as we still have to transport two coaches from Yorkshire, an engine from Warrington , and are assisting Mr. Wildish with the purchase of another engine for the Society, we cannot afford to be complacent.  We still desperately need labour and money!  Any help at all, in either of these directions, will be more than welcome, especially in the selling of Tote tickets amongst your friends, or coming along on a Saturday or Sunday afternoon fro a bit of track digging , or painting.

T.G.Cousens  Hon. Secretary

 

From the Chairman’s Notes

The Society had a new Chairman as well as a new Secretary, with Mr.C.E.Ives taking over from Albert Holden, who was thanked for his work for the Society, especially as the organiser of the weekly Tote, which has brought in hundreds of pounds to the Society.

In addition to the usual appeal for members to help with track work, there was also an appeal for help with the smaller relics in the museum, Mr. Nigel Hadlow was the Hon. Curator.

Also grateful thanks to our engineering staff both at Chasewater and Hixon, who are both restoring and maintaining motive power, I understand that before long, steam will be up at Chasewater.  Long may it blow off!!!

In conclusion a special thank you to one of our junior members Doug Hood, who spent most of his summer holiday painting and restoring stock at Hednesford.

Progress at Chasewater

As regular members will know a considerable amount of progress is taking place at Chasewater.  The present project is the complete clearing of all track.  This is a formidable operation but already a good portion of the Norton passing loop is complete and if progress is maintained the causeway over Chasewater should be reached by winter.  A weed killing wagon has been purchased and this will be put to use as each section is cleared.  The removal of the undergrowth has revealed the track to be in a remarkable state of preservation.

During the summer months the level of Chasewater dropped several feet ( the 2010 version really showed how it should be done!!) and the opportunity was taken to do some work on the bridge at the end of the causeway.

The works trains are now hauled by the ex Worthington diesel No.21 with diesel No.1 acting as spare engine.  The third diesel No.20 is at present being overhauled and will no doubt be in use in the near future.

At the beginning of October contractors working on behalf of Aldridge-Brownhills Urban District Council commenced the preparation of the ground on the site of the proposed museum and this stage is due to be completed by December bringing us one step nearer to our goal.

Although the winter is ahead work will proceed as usual.  General maintenance will continue to be done on Saturdays and track clearing on Sundays.  All members, old and new, are welcome.  The job is a hard one but as everyone who has helped agrees the sight of nice, clean permanent way is one of the most rewarding experiences we have yet had at Chasewater.

F.J.Harvey

 

Report on the Neilson Locomotive Fund

The fund was helped in no small measure by the running of a raffle, which made a profit of £92. 16s. 9d. (£92.84p) The figures seem very small by 2010 standards!

The income was £32.50 donations, £ 92.84 raffle and a loan of £80.00. The first payment on the loco of £75.00 had been made.  Payment for the locomotive has been guaranteed by the end of March – that is the other £75.  This leaves us £57.36 to move the Neilson which may well have to be moved to Chasewater in April, and another £100 will be required by then.

There followed an appeal for more funds – public appeals in the Railway Observer and the Railway Word had not brought in a penny despite good billings in both magazines.

Thanks to everyone for help with the raffle.  It is hoped that before the summer is very old we shall have Baird and Scottish Steel’s No. 11 in steam at Chasewater.

From an article by Gerald Wildish

 

A Weekend at Desborough by Laurence Hopkins.

Saturday 21st October, 1967. In spite of typical RPS weather, as members set out for Desborough we were in high spirits, and were looking forward to seeing the Hudswell Clarke in steam.  On arrival the members found a difficult task before them in that nearly three lengths of track had been lifted, between the points on the shed road.  While Mr. Civil and Mr. Luker got steam up, a start was made in lifting three lengths of track from an adjoining line.  This being done, and the engine having sufficient steam up, we proceeded to move the rail 60ft lengths up to the points.  This task was carried out in filthy weather, and half the distance was completed by nightfall.

Sunday 22nd October,1967. Transport was by Mike Lewis’s van, and having made ourselves comfortable, we proceeded on the way via the Chester Road, as Trevor had run out of petrol at New Oscott.  We then did a grand tour of Coventry City.  On arrival at Desborough, the remaining lengths of track were laid.  The track being completed, the engine was run out over the section laid.  After lunch the engine was put through its paces and found to be mechanically sound.  To sum up – we must thank Mr. Civil and Mr. Luker for the fine work they put in, getting the engine ready for its steaming test.

Leave a comment

Posted in Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , , , , , , , ,

Chasewater Railway Museum May June 1967 Bits & Pieces 40

Posted on February 28, 2020 by | Leave a comment

Taken from the new look Mercian of 1967 Vol.1 No.1

Manning Wardle Littleton No.5 – RPS Trip May 1967

Progress at Chasewater

Work has continued throughout the winter and members are now looking forward to the lighter evenings.

A temporary siding has been laid in the vicinity of the platelayers’ cabin, on which the stock that is not normally in use can be stored.  The works train now consists of the ‘Planet’ diesel, which is in the process of being repainted, a Midland Railway flat wagon and a colliery company brake van.

Ditching at the north end of the line is almost complete and it is hoped that work on track re-alignment and clearing will take place later this summer.

Restoration work is in progress on the GWR brake van and NSR open wagon while the Midland Railway passenger brake has received a temporary coat of red oxide.  Much more work has to be done on theses vehicles and anyone prepared to help will be most welcome.

Stop Press

A major step forward fro the Society came a few weeks ago when it was announced that Aldridge-Brownhills Council have finally given us planning permission for our museum at Chasewater.  We have been awaiting this news for several months, and our grateful thanks for all the hard persistent work he has put in to keep things moving with the Council go to our President Mr. Charles Ives.  We are now obtaining estimates from firms so that the building can be started as soon as possible.

Progress on the Andrew Barclay loco at Hixon has been very good over the last few weeks thanks to the efforts of several members.  Painting of the underframes is nearing completion, and it should not be many weeks before the wheels can be put back.  When they are, the rest of the engine can have its final coat of paint and the motion re-assembled.  We are still hoping it will be ready to go up to Chasewater this year, so if you can spare a couple of hours and can use a paint-brush, please go along and do your bit.

We now have both of the Worthington diesels from Burton at Chasewater, fetched by our good friend Jake Bacon, where they have been put through their paces and proved themselves to be excellent machines.

Full Circle – L.E.Hodgkinson

No doubt some members were surprised, and perhaps apprehensive, when it was announced last year in the ‘Mercian’ that the Society had purchased a diesel loco.  A number of working party members put up the £50 to buy it, and our good friend John Bacon transported it from ‘Pitrails’ of Aldridge to Chasewater on his low-loader.  It is a very small machine, built by Hibberds to a very ancient design, and has to be started by means of a handle.Chasewater No.1 Diesel Loco being painted by Frank Harvey.

Since then it has been used to move track materials and shunt stock.  It has also been used for uprooting bushes and for ditch-digging!

Its mechanical condition was appalling, but has now been improved to such an extent that it is merely shocking!  Its low power and difficult starting caused us to look for a replacement.  We were fortunate in being able to purchase two Hibberd type diesels from Bass Breweries of Burton for the very modest sum of £50 each.  Bob Wormington purchase one, and a number of members donated the other.  The locos are of very robust construction, with modern Dorman engines complete with electric start.  Coupled in tandem they will move any stock that we have.  When they arrive at Chasewater in the near future, old No.1 will be retired as ‘spare engine’ and will once more be ‘stored out-of-use’.

Lest any member be disturbed by this ‘dieselisation’, remember that these are only departmental engines to prepare the track for when the steam engines arrive.  If anyone wants to speed up the return of steam to Chasewater, volunteers are wanted to help with the painting of the ‘Barclay’ engine at Hixon.

A Breath of Wales – N.Hadlow

A breath of Wales came to Hednesford on Sunday 16th April, when we collected a large bi-lingual cast iron notice from Bala Junction that had been purchased by one of our members.   The sign tells passengers to cross the line by the bridge, or as the Welsh version puts it –

‘Ni oddefir I deither I groes’r rheilffordd ond dros y bont’

and according to the BR invoice it weighed 2 cwts., but after four of us had carried it ¼ mile over a field to the road in the blazing sun, we reckoned it could easily have been 2 tons!  It is certainly nearer 4 cwts.  There are only two signs of this kind in existence, both at Bala Junction, and we would have had them both but for the fact that somebody else had purchased the other one!

Other relics keep on coming in from time to time, such as a GWR hotels fruit salad bowl, GWR luggage labels, forms, appendices to rule books and other paperwork, an LNWR gate notice, GWR and LNWR padlocks and several other items.

 

 

 

 

 

Leave a comment

Posted in Bits and Pieces, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , , ,

Chasewater Railway Museum Jan-Feb 1967 Bits & Pieces 39

Posted on February 15, 2020 by | Leave a comment

Chasewater Railway Yard 1966 Photo: Laurence Hodgkinson

From the ‘Mercian’ Jan-Feb 1967 Vol.6 No.1

 

The production of the magazine was under review, the cover was not really satisfactory around this time.  Bearing in mind that the magazine was typed and duplicated – no computer technology freely available in the 1960s – it’s a wonder that so many editions were published.  The next step they were trying for was an illustrated cover, and they were successful from the next edition.

From the Editorial

From time to time I receive news from our secretary of the activities of some of our younger members.  In this case it is Steve Gunn who has been regularly telling us of interesting rolling stock together with the condition it is in and also where it is located.  Some of these vehicles could well be incorporated in our collection and we sincerely thank Steve for his extremely useful contribution to our store of information.

Hon Secretary

More rolling stock

Monday 23rd January saw the delivery of the 16t Brake van and the NCB 10t Brake van to Chasewater.  The GWR brake is in particularly good condition and is complete with stove and lockers, an ideal cabin and shelter for the workers at Chasewater.

The Midland Railway passenger brake c1880 was delivered to Chasewater on Saturday January 28th.  It was unloaded during the morning, six members helped out with this tricky job.  Will all members please note that painting, etc., has to be carried out on these vehicles as soon as possible.  Report to the platelayers’ cabin either Saturday or Sunday afternoons.

Progress Report

Good progress is being made on the Andrew Barclay loco (now known as Colin McAndrew).  Alan Civil and his band of helpers have now repainted and relagged the boiler, and refitted the tank.

Any member interested in seeing steam at Chasewater this summer should report to the Hixon site any Sunday morning or afternoon.

The Hon. Treasurer’s Report was short and to the point – we need more money and members!

 

The date for the next Open Day was announced – Easter Weekend Saturday March 26th and Sunday March 27th at Hednesford from 2.00pm onwards.

Leave a comment

Posted in Bits and Pieces, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , ,

Chasewater Railway Museum Nov-Dec 1966 Bits & Pieces 38

Posted on February 6, 2020 by | Leave a comment

From the ‘Mercian’ Nov-Dec 1966 Vol.5 No.6

This photo is quite a bit ahead of time, I think.  Not from this Mercian, but it shows the conditions being worked in.

From the Editorial

The AGM has come and gone together with the light summer nights which have speeded up the work at Chasewater.  Naturally more effort has to be concentrated where most needed during the few precious hours of daylight now left.

You will read elsewhere of the progress made to date both at Chasewater and Hednesford, so that when 1967 dawns we shall be taking our next big step forward, that of running a steam train at Chasewater.

There was a report about the ARPS meeting at Portmadoc, including a request for help with funds for theJ36 and ’C’ Class 0-6-0 when required so that the purchases might be concluded.

Under the heading of affiliations the following were accepted into the Association – M & G N R P S, and the Hull Preservation Syndicate as an observer only.  The following were deferred until the meeting in London on January 21st 1967 – Severn Valley, LCGB, GWR Trust, Westerham Railway Museum, Southern Railway Club and the Loco Preservation (Sussex) Co. Ltd.

There was a short report about the ‘Forum’ magazine, which was still struggling with finances.

 

Hon. Secretary

Progress Report

Work has continued at Chasewater, the main task being the reinforcing of the embankment with fly ash, this material has been tipped into the cavities caused by the embankment fire (slow combustion), and effectively snuffed it out.

An ex Midland Railway flat wagon has now joined the fleet at Chasewater for use on maintenance work.  This vehicle together with the NSR wagon has been finished in battleship grey and appropriately lettered.  The MR wagon was kindly donated by Messrs. Thomas Boultons Ltd., of Froghall, Staffs.., of

Delivery has also been taken of the Peckett 0-4-0ST ‘Lance’ donated by Messrs. Whitecross Ltd., Warrington.  This has also delivered to Chasewater where it has been given a quick coat of green oxide paint to repel the rust which was starting to get a hold on the superstructure.

Andrew Barclay 0-4-0ST. Colin McAndrew – Considerable work has been done on this locomotive by Allan Civil and his team of ex Bagnall fitters.

We are extremely grateful to this team for all the hard work they have put in to get it ready for the hydraulic test which it successfully passed.  The loco was steamed successfully on November 13th, albeit stationary.  We look forward to seeing her at Chasewater in the not too distant future.

Restoration Work – A small amount of work has been done at Hednesford on the E1 and coaching stock.  A start has been made on refelting the coach roofs, but has now been held up due to the weather and lack of manpower.  The small relics grow apace and receive the usual loving care from Nigel Hadlow.

Mention must be made of the wonderful job of restoration done to our Wolverhampton trolley bus No.616 by John Hughes and Robin Oliver.  These two members must be congratulated on their steadfast painstaking work in putting the interior back to its original layout.

Other than a couple of mentions for the Tote and the Annual Dinner that’s pretty much the lot for this edition.

Leave a comment

Posted in Bits and Pieces, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , ,

Chasewater Railway Museum Nov-Dec 1966 Bits & Pieces 38

Posted on January 27, 2020 by | Leave a comment

Chasewater Railway Museum Nov-Dec 1966 Bits & Pieces 38

From the ‘Mercian’ Nov-Dec 1966 Vol.5 No.6

From the Editorial

 

The AGM has come and gone together with the light summer nights which have speeded up the work at Chasewater.  Naturally more effort has to be concentrated where most needed during the few precious hours of daylight now left.

You will read elsewhere of the progress made to date both at Chasewater and Hednesford, so that when 1967 dawns we shall be taking our next big step forward, that of running a steam train at Chasewater.

There was a report about the ARPS meeting at Portmadoc, including a request for help with funds for theJ36 and ’C’ Class 0-6-0 when required so that the purchases might be concluded.

Under the heading of affiliations the following were accepted into the Association – M & G N R P S, and the Hull Preservation Syndicate as an observer only.  The following were deferred until the meeting in London on January 21st 1967 – Severn Valley, LCGB, GWR Trust, Westerham Railway Museum, Southern Railway Club and the Loco Preservation (Sussex) Co. Ltd.

There was a short report about the ‘Forum’ magazine, which was still struggling with finances.

 

Hon. Secretary

Progress Report

Work has continued at Chasewater, the main task being the reinforcing of the embankment with fly ash, this material has been tipped into the cavities caused by the embankment fire (slow combustion), and effectively snuffed it out.

An ex Midland Railway flat wagon has now joined the fleet at Chasewater for use on maintenance work.  This vehicle together with the NSR wagon has been finished in battleship grey and appropriately lettered.  The MR wagon was kindly donated by Messrs. Thomas Boultons Ltd., of Froghall, Staffs.., of

Delivery has also been taken of the Peckett 0-4-0ST ‘Lance’ donated by Messrs. Whitecross Ltd., Warrington.  This has also delivered to Chasewater where it has been given a quick coat of green oxide paint to repel the rust which was starting to get a hold on the superstructure.

Andrew Barclay 0-4-0ST. Colin McAndrew – Considerable work has been done on this locomotive by Allan Civil and his team of ex Bagnall fitters.

We are extremely grateful to this team for all the hard work they have put in to get it ready for the hydraulic test which it successfully passed.  The loco was steamed successfully on November 13th, albeit stationary.  We look forward to seeing her at Chasewater in the not too distant future.

Restoration Work – A small amount of work has been done at Hednesford on the E1 and coaching stock.  A start has been made on refelting the coach roofs, but has now been held up due to the weather and lack of manpower.  The small relics grow apace and receive the usual loving care from Nigel Hadlow.

Mention must be made of the wonderful job of restoration done to our Wolverhampton trolley bus No.616 by John Hughes and Robin Oliver.  These two members must be congratulated on their steadfast painstaking work in putting the interior back to its original layout.

Other than a couple of mentions for the Tote and the Annual Dinner that’s pretty much the lot for this edition.

Leave a comment

Posted in Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , ,

Chasewater Railway Museum – Taken from the Mercian July – August 1966 Vol.5 No.4

Posted on January 14, 2020 by | Leave a comment

Taken from the Mercian July – August 1966 Vol.5 No.4

 

From the Secretary’s Report.

Members will be pleased to hear that we have moved the Barclay saddletank to the Hixon yard of our friend Jake Bacon.  (I’ve not read anything about this loco in the magazines until now.  It’s now known as Colin McAndrew!  There’s a photo of it at Hixon.)

Barclay Loco Colin McAndrew at Hixon – Rob Duffill’s Collection.

Renovation work is in progress until such time as she can be moved to the safety of the Chasewater building.  It is hoped that the two Pecketts will join her in the very near future, and I would like to express thanks to all those who have responded to the call for cash to cover the removal expenses.

Progress at Chasewater has been maintained steadily by the faithful few and the line is now in up to the site of the building.  The other track here has been left for the time being to enable the contractors to work in the confines of the trackbed.  A start has been made at the causeway end of the line in re0laying a length taken out by the demolition people and then work will centre on track tidying, moving a considerable amount of shale and spoil to strengthen the embankment near the small overbridge and other remedial works.  We shall still need plenty of help so please come.

From the Treasurer’s Report

Finance is reasonable at the moment but Chasewater is a big drain on resources and we must try to stem the flow as much as possible without jeopardising the project. (Given the state of Chasewater water level at the moment, the wording seems very prophetic!)

 

Late Round Up – Hon. Editor

I must apologise most profusely for the lateness of this edition due to personal circumstances beyond my control.   The next edition will reach you on time, and will contain news of the AGM.  I hope you will bear with me this time as I do like to have the mag. out on time.  (Considering the fact that this was the fourth magazine of the year members nowadays would certainly bear with him!)

Leave a comment

Posted in Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , , , ,

Chasewater Railway Museum – 1966 May-June Vol.5 No.3 Bits & Pieces 35

Posted on January 8, 2020 by | Leave a comment

Chasewater Railway Museum

1966 May-June Vol.5 No.3 Bits & Pieces 35

From the ‘Mercian’ May – June 1966 Vo.5 No.3

From the Editorial

 

The past few weeks have seen a number of developments both at Hednesford and at Chasewater.  Much effort by Melvyn Balance, Brian Hames, Frank Craddock and Ken Martin has transformed a large number of our collection of iron and brass into gleaming exhibits for open days, and I thank the lads for this useful contribution. 

Further items to arrive have been some LNWR destination clocks and finger boards from Walsall Station, some roof vents and other parts for the GER Brake from our good friend Mr. Plyer and his colleagues of the GE Society, and a load of wooden rail keys for Chasewater from the Severn Valley Society for which we sent our grateful thanks.  Other work at Hednesford has involved a general tidying up of the site for Open Day at Easter which attracted a fair number of visitors, among them two or three new members.  Particular thanks to our attractive salesgirls, Penny, Pat, Pauline, Dorothy and Jean for their help in raising just over £20 for the funds.

The work on tracklaying at Chasewater has progressed slowly but surely and has now reached the point where it becomes double track up to the museum building.  Work has been speeded up considerably no doubt because of the acquisition of our first loco – albeit a diesel – which is working up at Chasewater and is proving a boon in moving the NSR wagon and heavily laden platelayers’ trucks.

The loco has cost £50 – all subscribed for by about a dozen members – to save the general funds, and it is being recorded here for all to see that we are deeply grateful for this fine gesture.  This is only the start; we have more offers to consider.  The next one is a small saddle-tank in full working order at about £75.  How about a few advance donations??  Offers to me in the first instance, please.  More details will be given when these are to hand.  Continuing the money matters section, we have three steam locos to move from Warrington to Chasewater at an approximate cost of £250.  The Treasurer has already received a few donations as a result of the appeal made in the January edition.  However this is far from enough and we MUST move the locos within two months or we shall have to forfeit them completely.  Please, PLEASE help us to raise the ‘lolly’ before the end of May.  Contact either the Treasurer or myself as soon as possible, donations (or interest-free loans) desperately wanted.

The weekly Tote has now been launched and is going very well thanks to the faithful few who are selling tickets each week.  To date over £20 has been raised for the funds; this could be trebled if we can sell more tickets.  I do appeal to all members within range of the Depot to call and collect books of tickets for sale among their workmates and other contacts, please contact Albert Holden at your earliest convenience for tickets and full details of the Tote.

A.A.Chatfield – Hon. Editor

The Tote was run successfully for a number of years, bringing in much needed funds for the Society.

Hon. Treasurer’s Report

Planet Diesel Loco.  Members will be interested to hear that we have now acquired a Planet four wheel diesel locomotive. It was built by F. C. Hibberd around 1930, the exact date and history of the loco is, as yet, unknown.  It is powered by a Paxman 50 hp 3 cyl. Engine, and is capable of pulling several wagons.Laurence Hodgkinson

The loco has been delivered to Chasewater where it is in regular use on P. Way trains.  Members are now at work on repainting and repairing the body where necessary.  This has to be done on weekday evenings as the loco is on duty every weekend.  Any members willing to assist should contact me so that definite working times can be arranged.

It is important to complete restoration work as soon as possible as the loco is on show to the general public to a greater extent than any other item of rolling stock at the present time.

We would like to express our thanks to members Roger Hateley of Lichfield who has done all the negotiating for this valuable item of equipment.

Leave a comment

Posted in Chasewater Railway Museum, Chasewater Railway Museum Bits and Pieces

Tagged , , , , , , , , , ,